7
2.3 Installing Windows
®
10 64-bit With RAID
Functions
If you want to install Windows
®
10 64-bit OS on your SATA /
SATA2 / SATA3 HDDs with RAID functions, please follow the
procedures below.
STEP 1: Setting the BIOS RAID Items
After installing the hard disk drives, please set the necessary
RAID items in the BIOS before setting your RAID configuration.
Boot your system, and press <F2> key to enter BIOS setup
utility. Go to
Advanced
Storage Configuration
and set
SATA Mode Selection
to [RAID]. Press <F10> to save the
configuration changes and exit setup.
STEP 2: Use ASRock Easy RAID Installer
Easy RAID Installer can copy the RAID driver from a support
CD to your USB storage device with just one simple click in
UEFI setup. Please note that this feature is not available for all
models.
A. Plug in your USB flash drive into a USB port.
B. Enter UEFI SETUP UTILITY Tool and highlight “Easy
RAID Installer”. Press [Enter] to confirm the selection.
C. Follow the onscreen instruction to complete the process.
STEP 3: Set RAID configuration
Please refer to p.8 -17 of this document for instructions on how
to set RAID configuration.
STEP 4: Install Windows
®
10 64-bit OS on your system.
