1. Removing the Bottom Cover
6. Replacing the Bottom Cover
2. Installing the SO-DIMM
3. Installing the Hard Drive
4. Installing the Mini PCIe Card
Note
1. Remove the four screws on the bottom case.
2. Lift up and remove the top cover.
3. Attach one end of the SATA 1 to 1 Power Cable
to the hard drive.
4. Attach the SATA data cable and power cable
to the motherboard.
1. Attach the hard drive to the bottom panel.
Carefully align the mounting holes in the hard
drive and the bottom cover.
2. Secure the hard drive into the place using the
four screws.
1
2
2
1. Replace the top cover.
2. Secure the four screws at the bottom.
For more details on the hardware installation,
please refer to the User Manual in the support CD.
*This step is optional.
1. Locate the Mini PCIe slot on the motherboard.
2. Carefully insert the Mini PCIe card into the slot.
The terms HDMI™ and HDMI High-Definition
Multimedia Interface, and the HDMI logo are
trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other
countries.
3. Tighten the screw to secure the PCIe card to
the motherboard.
1. Locate the mSATA slot on the motherboard.
2. Carefully insert the mSATA SSD into the slot.
3. Tighten the screw to secure the mSATA SSD
to the motherboard.
2
1
1
2
4. Installing the mSATA SSD
*This step is optional.