ASROCK G41MH/USB3 R2.0, Quick Installation Manual

Page: 23 / 155

2 3 2 3 2 3 2 3 2 3
ASRock G41MH/USB3 R2.0 Motherboard
EnglishEnglishEnglishEnglishEnglish
2.8 2.8 2.8 2.8 2.8 Serial A Serial A Serial A Serial A Serial ATTTTTA (SA A (SA A (SA A (SA A (SATTTTTA) / Serial A A) / Serial A A) / Serial A A) / Serial A A) / Serial ATTTTTAII (SA AII (SA AII (SA AII (SA AII (SATTTTTAII) Hard Disks AII) Hard Disks AII) Hard Disks AII) Hard Disks AII) Hard Disks
Installation Installation
Installation Installation Installation
This motherboard adopts Intel ® ICH7 south bridge chipset that supports Serial ATA
(SATA) / Serial ATAII (SATAII) hard disks. You may install SATA / SATAII hard disks on
this motherboard for internal storage devices. This section will guide you to install the
SATA / SATAII hard disks.
STEP 1: Install the SATA / SATAII hard disks into the drive bays of your chassis.
STEP 2: Connect the SATA power cable to the SATA / SATAII hard disk.
STEP 3: Connect one end of the SATA data cable to the motherboard’s SATAII
connector.
STEP 4: Connect the other end of the SATA data cable to the SATA / SATAII hard
disk.
2.9 2.9
2.9 2.9
2.9 Driver Installation Guide Driver Installation Guide
Driver Installation Guide Driver Installation Guide
Driver Installation Guide
To install the drivers to your system, please insert the support CD to your optical drive
first. Then, the drivers compatible to your system can be auto-detected and listed on
the support CD driver page. Please follow the order from up to bottom side to install
those required drivers. Therefore, the drivers you install can work properly.
2.10 2.10
2.10 2.10 2.10 Untied Overclocking T
Untied Overclocking T
Untied Overclocking T Untied Overclocking T Untied Overclocking Technology
echnology
echnology echnology echnology
This motherboard supports Untied Overclocking Technology, which means during
overclocking, FSB enjoys better margin due to fixed PCI / PCIE buses. Before you
enable Untied Overclocking function, please enter “Overclock Mode” option of BIOS setup
to set the selection from [Auto] to [Manual]. Therefore, CPU FSB is untied during
overclocking, but PCI / PCIE buses are in the fixed mode so that FSB can operate under
a more stable overclocking environment.
Please refer to the warning on page 7 for the possible overclocking risk
before you apply Untied Overclocking Technology.