EPC621D8A
20
21
English
2.6 Jumper Setup
The illustration shows how jumpers are setup. When the jumper cap is placed on
the pins, the jumper is “Short”. If no jumper cap is placed on the pins, the jumper
is “Open”. The illustration shows a 3-pin jumper whose pin1 and pin2 are “Short”
when a jumper cap is placed on these 2 pins.
NVDIMM Support Jumpers
(3-pin AEP_1)
(see p.6, No. 12)
(3-pin AEP_2)
(see p.6, No. 18)
Not support NVDIMM
Support NVDIMM
PMBUS Mode Jumper
(3-pin PMBUS_SEL_CLK1)
(see p.6, No. 9)
(3-pin PMBUS_SEL_DAT1)
(see p.6, No. 46)
(3-pin PMBUS_SEL_ALT1)
(see p.6, No. 5)
PMBus connected to BMC
(Default)
PMBus connected to PCH
