ASROCK EPC612D4U, User Manual

Page: 37 / 92

EPC612D4U Series
31
English
2.7 Jumper Setup
he illustration shows how jumpers are setup. When the jumper cap is placed on
the pins, the jumper is “Short”. If no jumper cap is placed on the pins, the jumper
is “Open”. he illustration shows a 3-pin jumper whose pin1 and pin2 are “Short”
when a jumper cap is placed on these 2 pins.
ME Recovery Jumper
(3-pin ME_RECOVERY1)
(No. 2)
ME Recovery Mode Normal Mode (Default)
CPU PECI Mode Jumper
(3-pin PECI_SEL1)
(No. 1)
CPU PECI connect to PCH CPU PECI connect to BMC
(Default)
Descriptor Security Override
Jumper
(3-pin J100)
(No. 3)
Descriptor Security Over-
ride
No Override (Default)
PMBUS Mode Jumper
(3-pin PMBUS_CLK_SEL)
(No. 7)
(3-pin PMBUS_DATA_SEL)
(No. 8)
(3-pin PMBUS_ALT_SEL)
(No. 9)
PMBus connected to BMC
(Default)
PMBus connected to PCH