ASROCK EP2C621D24LM-AB User Manual Download Page 58

Page: 58 / 97

English

3.3.4 Storage Configuration

Hard Disk S.M.A.R.T.

Use this item to enable or disable the S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting
Technology) feature. Configuration options: [Disabled] and [Enabled].

SATA Controller

Use this item to enable or disable SATA Controllers.

SATA Mode Selection

Identify the SATA port is connected to Solid State Drive or Hard Disk Drive. Press
<Ctrl+I> to enter RAID ROM during UEFI POST process.

SATA ALPM

Use this item to enable or disable SALP.

SSATA Controller

Use this item to enable or disable SATA Controllers.

SSATA/M.2_SATA Mode Selection

Identify the sSATA/M.2_SATA port is connected to Solid State Drive or Hard Disk Drive.
Press <Ctrl+I> to enter RAID ROM during UEFI POST process.

Summary of Contents for EP2C621D24LM-AB

































































































Search results

Summary of Contents for EP2C621D24LM-AB

Reviews:

Related manuals for EP2C621D24LM-AB

Brands by name

Popular brands

ASROCK EP2C621D24LM-AB, User Manual

Search results

Summary of Contents for EP2C621D24LM-AB

Reviews:

Related manuals for EP2C621D24LM-AB

Brands by name

Popular brands