ASROCK EP2C612 WS User Manual Download Page 77

Page: 77 / 104

English

3.4.8 Storage Coniguration

Hard Disk S.M.A.R.T.

Use this item to enable or disable the S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting

Technology) feature. Coniguration options: [Disabled] and [Enabled].

SATA Storage Coniguration

SATA Controller

Use this item to enable or disable SATA Controller.

SATA Mode Selection

Use this to select SATA mode. Coniguration options: [Disabled], [IDE], [AHCI] and [RAID

] mode. he default value is [AHCI ].

AHCI (Advanced Host Controller Interface) supports NCQ and other new features that will
improve SATA disk performance but IDE mode does not have these advantages.

SATA Aggressive Link Power Mgnt

Use this item to conigure SATA Aggressive Link Power Management.

Summary of Contents for EP2C612 WS









































































































Search results

Summary of Contents for EP2C612 WS

Reviews:

Related manuals for EP2C612 WS

Brands by name

Popular brands

ASROCK EP2C612 WS, User Manual

Search results

Summary of Contents for EP2C612 WS

Reviews:

Related manuals for EP2C612 WS

Brands by name

Popular brands