ASROCK C246 WS User Manual Download Page 54

Page: 54 / 85

English

PCIE2 Link Speed

This allows you to select PCIE2 Link Speed. The default value is [Auto].

PCIE2 ASPM Support

This option enables or disables the ASPM support for PCIE2.

PCIE4 Link Speed

This allows you to select PCIE4 Link Speed. The default value is [Auto].

PCIE4 ASPM Support

This option enables or disables the ASPM support for PCIE4.

PCIE6/PCIE4 Link Width

This allows you to select PCIE6/PCIE4 Link Width. The default value is [Auto].

PCIE6 Link Speed

This allows you to select PCIE6 Link Speed. The default value is [Auto].

PCIE6 ASPM Support

This option enables or disables the ASPM support for PCIE6.

PCIE7 Link Speed

This allows you to select PCIE7 Link Speed. The default value is [Auto].

PCIE7 ASPM Support

This option enables or disables the ASPM support for PCIE7.

Above 4G Decoding

Enable or disable 64bit capable Devices to be decoded in Above 4G Address Space (only if
the system supports 64 bit PCI decoding).

IGPU Multi-Monitor

Select disable to disable the integrated graphics when an external graphics card is installed.
Select enable to keep the integrated graphics enabled at all times.

Onabord HDMI HD Audio

This allows you to enable or disable the Onboard HDMI HD Audio feature.

M.2 WIFI

This allows you to enable or disable M.2 WIFI.

Summary of Contents for C246 WS





















































































Search results

Summary of Contents for C246 WS

Reviews:

Related manuals for C246 WS

Brands by name

Popular brands

ASROCK C246 WS, User Manual

Search results

Summary of Contents for C246 WS

Reviews:

Related manuals for C246 WS

Brands by name

Popular brands