ASROCK ALIVENF5-VSTA, Installation Manual

Page: 26 / 170

2 6 2 6
2 6 2 6 2 6
ASRock ALiveNF5-VSTA Motherboard
EnglishEnglishEnglishEnglishEnglish
NOTE. If you install Windows ® 2000 / Windows ® XP / Windows ® XP 64-bit on IDE
HDDs and want to manage (create, convert, delete, or rebuild) RAID functions
on SATA / SATAII HDDs, you still need to set up “SATA Operation Mode” to [RAID]
in BIOS first. Then, please set the RAID configuration by using the Windows RAID
installation guide part of the document in the following path in the Support CD:
.. \ RAID Installation Guide
2.13.2 Installing Windows 2.13.2 Installing Windows 2.13.2 Installing Windows 2.13.2 Installing Windows 2.13.2 Installing Windows
®
Vista Vista Vista Vista Vista
TM TM TM TM TM
/ Vista / Vista / Vista / Vista / Vista
TM TM TM TM TM
64-bit With 64-bit With 64-bit With 64-bit With 64-bit With
RAID F RAID F RAID F RAID F RAID Functions unctions unctions unctions unctions
If you want to install Windows
®
Vista
TM
/ Windows
®
Vista
TM
64-bit on your SATA / SATAII
HDDs with RAID functions, please follow below steps.
STEP 1: Set Up BIOS.
A. Enter BIOS SETUP UTILITY Advanced screen IDE Configuration.
B. Set the “SATA Operation Mode” option to [RAID].
STEP 2: Use “RAID Installation Guide” to set RAID configuration.
Before you start to configure RAID function, you need to check the RAID installation
guide in the Support CD for proper configuration. Please refer to the BIOS RAID
installation guide part of the document in the following path in the Support CD:
.. \ RAID Installation Guide
STEP 3: Install Windows ® Vista TM / Vista TM 64-bit OS on your system.
Insert the Windows ® Vista TM / Windows ® Vista TM 64-bit optical disk into the optical drive
to boot your system, and follow the instruction to install Windows ® Vista TM / Windows ®
Vista
TM
64-bit OS on your system. When you see “Where do you want to install Windows?
” page, please insert the ASRock Support CD into your optical drive,
and click the “Load Driver” button on the left on the bottom to load the NVIDIA
®
RAID
drivers. NVIDIA
®
RAID drivers are in the following path in our Support CD:
.. \ I386 \ Vista32_RAID (For Windows
®
Vista
TM
OS)
.. \ AMD64 \ Vista64_RAID (For Windows
®
Vista
TM
64-bit OS)
After that, please insert Windows ® Vista TM / Windows ® Vista TM 64-bit optical disk into
the optical drive again to continue the installation.
Please select A and B for Windows ® 2000 / XP / XP 64-bit in RAID mode. (There are two
RAID drivers needed for RAID mode, you have to select them separately. Please specify
the first RAID driver and then specify again for the second one.)
A. NVIDIA RAID Driver (required)
B. NVIDIA nForce Storage Controller (required)
NOTE. If you install Windows
®
Vista
TM
/ Windows
®
Vista
TM
64-bit on IDE HDDs and want to
manage (create, convert, delete, or rebuild) RAID functions on SATA / SATAII HDDs,
you still need to set up “SATA Operation Mode” to [RAID] in BIOS first. Then, please
set the RAID configuration by using the Windows RAID installation guide in the
following path in the Support CD:
.. \ RAID Installation Guide