4 2
4 2
4 2
4 2
4 2
BIOS SETUP UTILITY
Hardware Health Event Monitoring
Select Screen
Select Item
F1
General Help
F9
Load Defaults
F10
Save and Exit
ESC
Exit
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
CPU Ambient Temperature
CPU Internal Temperature
M / B Temperature
CPU Fan Speed
Chassis Fan Speed
Vcore
+ 3.30V
+ 5.00V
+ 12.00V
: 42 C / 107 F
: 2833 RPM
: N / A
: 1.532 V
: 3.129 V
: 4.877 V
: 11.741 V
: 52 C / 125 F
: 31 C / 87 F
Main
Advanced
Boot
Security
Exit
H/W Monitor
CPU Quiet Fan
[Disabled]
You are allowed to
enable this function
only when you install
4-pin CPU fan.
Legacy USB Support
Use this item to enable or disable the support to emulate the I/O devices
of legacy OS (DOS) such as mouse, keyboard, USB flash... etc. Or you
may select [Auto] so that the system will start to auto-detect; if there is
no USB device connected, “Auto” option will disable the legacy USB
support.
3.4
3.4
3.4
3.4
3.4
Hardware Health Event Monitoring Screen
Hardware Health Event Monitoring Screen
Hardware Health Event Monitoring Screen
Hardware Health Event Monitoring Screen
Hardware Health Event Monitoring Screen
In this section, it allows you to monitor the status of the hardware on your system,
including the parameters of the CPU temperature, motherboard temperature, CPU fan
speed, chassis fan speed, and the critical voltage.
CPU Ambient Temperature
This item shows the temperature sensed by thermistor near CPU.
CPU Internal Temperature
This item shows the temperature sensed by dual current source
CPU.
CPU Quiet Fan
This item allows you to identify the temperature of CPU fan. Configuration
options: [Disabled] and [Enabled]. The default value is [Disabled]. You are
allowed to enable this function only when you install 4-pin CPU fan.
