background image

7

77

77

 Rear Panel I/O

I/O Panel

- 1 x PS/2 Mouse Port

- 1 x PS/2 Keyboard Port

- 1 x VGA/D-Sub Port

- 1 x VGA/DVI-D Port

- 1 x HDMI Port

- 1 x Optical SPDIF Out Port

- 4 x Ready-to-Use USB 2.0 Ports

- 1 x RJ-45 LAN Port with LED (ACT/LINK LED and SPEED LED)

- HD Audio Jack: Side Speaker/Rear Speaker/Central/Bass/

  Line in/Front Speaker/Microphone (see 

CAUTION 7

)

 Connector

- 6 x Serial ATAII 3.0Gb/s connectors, support RAID (RAID 0,

  RAID 1, RAID 10 and JBOD), NCQ, AHCI and “Hot Plug”

  functions (see 

CAUTION 8

)

- 1 x ATA133 IDE connector (supports 2 x IDE devices)

- 1 x Floppy connector

- 1 x IR header

- 1 x COM port header

- CPU/Chassis/Power FAN connector

- 24 pin ATX power connector

- 4 pin 12V power connector

- CD in header

- Front panel audio connector

- 3 x USB 2.0 headers (support 6 USB 2.0 ports)

  (see 

CAUTION 9

)

 

BIOS Feature

- 8Mb AMI BIOS

- AMI Legal BIOS

- Supports “Plug and Play”

- ACPI 1.1 Compliance Wake Up Events

- Supports jumperfree

- SMBIOS 2.3.1 Support

- VCCM, NB Voltage Multi-adjustment

- Supports Smart BIOS

 Support CD

- Drivers, Utilities, AntiVirus Software (Trial Version), AMD

  OverDrive

TM

 Utility, AMD Live! Explorer, AMD Fusion

 Unique Feature

- ASRock OC Tuner (see 

CAUTION 10

)

- Intelligent Energy Saver (see 

CAUTION 11

)

- Instant Boot

- ASRock Instant Flash (see 

CAUTION 12

)

- ASRock OC DNA (see 

CAUTION 13

)

- Hybrid Booster:

- CPU Frequency Stepless Control (see 

CAUTION 14

)

Summary of Contents for A785GMH 128M
































































Reviews: