ASROCK A780FULLDISPLAYPORT, Installation Manual

Page: 34 / 224

3 4 3 4
3 4 3 4 3 4
ASRock A780FullDisplayPort Motherboard
EnglishEnglishEnglishEnglishEnglish
NOTE. If you install Windows ® XP / Windows ® XP 64-bit on IDE HDDs and want to manage
(create, convert, delete, or rebuild) RAID functions on SATA / SATAII HDDs, you still
need to set up “SATA Operation Mode” to [RAID] first. Then, please set the RAID
configuration by using the Windows RAID installation guide in the following path in
the Support CD:
.. \ RAID Installation Guide
2.14.2 Installing Windows 2.14.2 Installing Windows 2.14.2 Installing Windows 2.14.2 Installing Windows 2.14.2 Installing Windows
®
Vista Vista Vista Vista Vista
TM TM TM TM TM
/ Vista / Vista / Vista / Vista / Vista
TM TM TM TM TM
64-bit With 64-bit With 64-bit With 64-bit With 64-bit With
RAID F RAID F RAID F RAID F RAID Functions unctions unctions unctions unctions
If you want to install Windows
®
Vista
TM
or Windows
®
Vista
TM
64-bit on a RAID disk
composed of 2 or more SATA / SATAII HDDs with RAID functions, please follow below
steps.
STEP 1: Set up BIOS.
A. Enter BIOS SETUP UTILITY Advanced screen IDE Configuration.
B. Set the “SATA Operation Mode” option to [RAID].
STEP 2: Use “RAID Installation Guide” to set RAID configuration.
Before you start to configure RAID function, you need to check the RAID installation
guide in the Support CD for proper configuration. Please refer to the BIOS RAID installation
guide part of the document in the following path in the Support CD:
.. \ RAID Installation Guide
STEP 3: Install Windows
®
Vista
TM
/ Vista
TM
64-bit OS on your system.
Insert the Windows
®
Vista
TM
/ Windows
®
Vista
TM
64-bit optical disk into the optical drive
to boot your system, and follow the instruction to install Windows
®
Vista
TM
/ Windows
®
Vista
TM
64-bit OS on your system. When you see “Where do you want to install Windows?
” page, please insert the ASRock Support CD into your optical drive, and click the “Load
Driver” button on the left on the bottom to load the AMD RAID drivers. AMD RAID drivers
are in the following path in our Support CD:
(There are two ASRock Support CD in the motherboard gift box pack, please
choose the one for Windows ® Vista TM / Vista TM 64-bit.)
.. \ I386 (For Windows ® Vista TM OS)
.. \ AMD64 (For Windows ® Vista TM 64-bit OS)
After that, please insert Windows ® Vista TM / Windows ® Vista TM 64-bit optical disk into
the optical drive again to continue the installation.
STEP 4: Install Windows ® XP / Windows ® XP 64-bit OS on your system.
After step 1, 2, 3, you can start to install Windows ® XP / Windows ® XP 64-bit OS on your
system. At the beginning of Windows ® setup, press F6 to install a third-party RAID
driver. When prompted, insert the SATA / SATAII driver diskette containing the AMD
RAID driver. After reading the floppy disk, the driver will be presented. Select the driver to
install according to the OS you install. (Select “AMD AHCI Compatible RAID Controller-
x86 platform” for Windows
®
XP, or “AMD AHCI Compatible RAID Controller-x64 platform”
for Windows
®
XP 64-bit.)