2 8
2 8
2 8
2 8
2 8
3.3.2
3.3.2
3.3.2
3.3.2
3.3.2 Chipset Configuration
Chipset Configuration
Chipset Configuration
Chipset Configuration
Chipset Configuration
DRAM Frequency
If [Auto]
is selected, the motherboard will detect the memory module(s)
inserted and assigns appropriate frequency automatically. You may also
select other value as operating frequency: [133MHz (DDR 266)],
[166MHz (DDR 333)], [200MHz (DDR 400)].
Flexibility Option
The default value of this option is [Disabled]. It will allow better tolerance for
memory compatibility when it is set to [Enabled].
DRAM CAS# Latency
Use this item to adjust the means of memory accessing. Configuration
options: [Auto], [2.5], [2], and [3].
DRAM Command Rate
Use this to select among [2T Command] and [1T Command] for DRAM
Command Rate. The default value is [2T Command].
DRAM Bus Selection
The default value is [Auto], which will automatically select the proper ac-
cess mode for the system. You may select between [Single Channel] and
[Dual Channel] if you have properly set the dual channel memory
configuration.
B
IO
S S
E
TUP UT
ILI
T
Y
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
Chipset Configuration
DRAM Frequency
Flexibility Option
DRAM CAS# Latency
DRAM Command Rate
DRAM Bus Selection
DRAM Voltage
AGP Voltage
Primary Graphics Adapter
AGP Aperture Size
AGP Mode
AGP Fast Write
PCI Delay Transaction
OnBoard LAN
OnBoard AC'97 Audio
[Disabled]
[Auto]
[Normal]
[High]
[PCI]
[64MB]
[Auto]
[Disabled]
[Auto]
[Auto]
[2T Command]
[Disabled]
[Eabled]
[Auto]
Select Screen
Select Item
+ -
Change Option
F1
General Help
F10
Save and Exit
ESC
Exit
F9
Load Defaults
Options
133MHz
(DDR266)
166MHz
(DDR333)
200MHz
(DDR400)
Auto
A
dv
ance
d
