manualshive.com logo in svg

ASROCK 4X4 BOX-R1000, User Manual

Share
Download
ASROCK 4X4 BOX-R1000 User Manual Download Page 31

4X4 BOX-V1000/R1000

24

25

English

5.3.1  CPU Configuration

Cool ‘n‘ Quiet
 

Use this item to enable or disable AMD’s Cool ‘n’ QuietTM technology.

 

The default value is [Enabled]. Configuration options: [Enabled] and [Dis

-

abled]. If you install Windows

®

 OS and want to enable this function, please 

set this item to [Enabled]. Please note that enabling this function may re-
duce CPU voltage and memory frequency, and lead to system stability or 
compatibility issue with some memory modules or power supplies. Please 
set this item to [Disable] if above issue occurs.

SVM Mode

When this is set to [Enabled], a VMM (Virtual Machine Architecture) can 
utilize the additional hardware capabilities provided by AMD-V. The default 

value is [Enabled]. Configuration options: [Enabled] and [Disabled].

Core Performance Boost

The default value is [Auto].

AMD fTPM Switch
 

Use this to enable or disable AMD CPU fTPM.

Summary of Contents for 4X4 BOX-R1000












































Reviews:

No comments

Brands by name

Popular brands

Load more brands