ASROCK Rack ROMED6U-2L2T, User Manual

Page: 32 / 78

26 27
English
SATA Power Connector
(DC-IN Mode)
(4-pin SATA_PWR1)
(see p.6, No. 14)
1 2
3
4
+5V
GND
+12V
GND
Please use a SATA power cable
to connect this SATA Power
Connector and your SATA
HDD for supplying power
from the motherboard, when
using DC-IN mode without
SATA power supply.
*Caution: Misconnection between
the ATX4PIN1 and the SATA_PWR1
connectors may permanently damage
the motherboard.
ATX 12V Power
Connectors
(8-pin ATX12V1)
(see p.6, No. 2)
(8-pin ATX12V2)
(see p.6, No. 1)
4
8
1
5
12V
GND
The motherboard provides two
8-pin 12V power connectors
which are required input for
either DC-IN 12V or ATX
+12V power source.
When using ATX power, it is
necessary to use a 24pin-to-
4pin power cable to connect
between the 24pin power
connector of PSU and the
ATX4PIN1 connector on the
motherboard for power supply
and signal communication.
Clear CMOS Pads
(CLRMOS1)
(see p.6, No. 31) This allows you to clear the
data in CMOS. To clear CMOS,
take out the CMOS battery and
short the Clear CMOS Pad.
Front LAN LED Header
(4-pin LED_LAN3_4)
(see p.5, No. 29)
1
LAN4_LINK
LED_PWR
LED_PWR
LAN3_LINK
This 4-pin connector is used
for the front LAN status
indicator.