ASROCK Rack EP2C622D16-2T User Manual Download Page 74

Page: 74 / 98

English

3.3.12 Intel® VMD technology

Press <Enter> to bring up the Intel

VMD for Volume Management Device Configuration

menu.

Intel

VMD for Volume Management Device for Socket0 /

Intel

VMD for Volume Management Device on Socket1

Intel

VMD for Volume Management Device Technology

Use this item to enable or disable Intel(R) Volume Management Device Technology in this
Stack.
When [Enabled], users are allowed to configure the options below.

VMD port 1A

Use this item to enable or disable Intel(R) Volume Management Device Technology on
specific root port.

VMD port 1B

Use this item to enable or disable Intel(R) Volume Management Device Technology on
specific root port.

VMD port 1D

Use this item to enable or disable Intel(R) Volume Management Device Technology on

Summary of Contents for EP2C622D16-2T


































































































Search results

Summary of Contents for EP2C622D16-2T

Reviews:

Related manuals for EP2C622D16-2T

Brands by name

Popular brands

ASROCK Rack EP2C622D16-2T, User Manual

Search results

Summary of Contents for EP2C622D16-2T

Reviews:

Related manuals for EP2C622D16-2T

Brands by name

Popular brands