ASROCK Rack EP2C622D16-2T User Manual Download Page 60

Page: 60 / 98

English

PCIE6 Link Speed

This allows you to select PCIE Link Speed.

PCIE6 ASPM Support

This option enables or disables the ASPM support for all CPU downstream devices.

OCU1 Link Speed

This allows you to select PCIE Link Speed.

OCU1 ASPM Support

This option enables or disables the ASPM support for all CPU downstream devices.

SLIMELIN1-1 Link Speed

This allows you to select PCIE Link Speed.

SLIMELIN1-1 ASPM Support

This option enables or disables the ASPM support for all CPU downstream devices.

SLIMELIN1-2 Link Speed

This allows you to select PCIE Link Speed.

SLIMELIN1-2 ASPM Support

This option enables or disables the ASPM support for all CPU downstream devices.

SR-IOV Support

If system has SR-IOV capable PCIe Devices, this option Enables or Disables Single Root IO
Virtualization Support.

Onboard Debug Port LED

Enable/Disable the onboard Dr. Debug LED.

Restore AC Power Loss

This allows you to set the power state after a power failure. If [Power Off] is selected, the
power will remain off when the power recovers. If [Power On] is selected, the system will
start to boot up when the power recovers.

Summary of Contents for EP2C622D16-2T


































































































Search results

Summary of Contents for EP2C622D16-2T

Reviews:

Related manuals for EP2C622D16-2T

Brands by name

Popular brands

ASROCK Rack EP2C622D16-2T, User Manual

Search results

Summary of Contents for EP2C622D16-2T

Reviews:

Related manuals for EP2C622D16-2T

Brands by name

Popular brands