C422 WSI/IPMI / X299 WSI/IPMI
20
21
English
2.5 Jumper Setup
The illustration shows how jumpers are setup. When the jumper cap is placed on
the pins, the jumper is “Short”. If no jumper cap is placed on the pins, the jumper
is “Open”. The illustration shows a 3-pin jumper whose pin1 and pin2 are “Short”
when a jumper cap is placed on these 2 pins.
Enable/Disable BMC Jumper
(3-pin BMC_DIS1)
(see p.6, No. 3)
Normal Mode (Default)
BMC Enabled
BMC Disabled
