13
Electric Spin Scrubber
TROUBLE-
SHOOTING
05
The charging
indicator doesn’t
light up when
charging.
·
Check if the charging socket is abnormal or out
of power.
·
If the indicator light is green after inserting the
adapter, the product is fully charged and can be
used by simply turning it on.
·
If it is neither of the above two cases, please
contact our customer service.
The brush head
spins less than 90
minutes or doesn’t
work after
pressing Power
button twice when
the battery is fully
charged.
Each user will use different downforce during
use. If you keep pressing the brush head hard,
the working time will be less than 90 minutes.
In order to prolong the use time, please do not
press the brush head too hard, as frequent
pressing will break the brush head.
Streamline Your
Home Cleaning
Routine
The charging
indicator doesn't
turn green after
charging for over
5 hours.
·
Check whether the electrical outlet and
charging port are loose. Plug them in tightly
before charging.
·
If the product is immersed in water during use,
it will damage the internal circuit and cause
abnormal charging.
·
If it is neither of the above two cases, please
contact our customer service.
The brush head
stops spinning
while working.
·
If charging indicator flashes red for 30s and
then stops, you may press the brush head too
hard and the product automatically stops in the
protected state. Just switch the Power button
once or twice to return to normal.
·
If charging indicator keeps flashing red and
doesn’t stop, it means the product runs out of
battery and needs to be fully charged before use.
·
If it is neither of the above two cases, the
product stops spinning after less than 10s, or if
the spin does not resume after pressing Power
button twice, please contact our customer
service.
The charging
indicator turns
green
(representing full
charge) but the
brush head does
not spin after it is
turned on.
·
Check whether the brush head is tightly
connected with the Extension Handle or Main
Handle. Please refer to
Assembly
Your Spin
Scrubber
for more information.
·
If it has been well-connected and the product
has not been soaked in water before, but the
brush head does not spin after turning on or it
stops spinning without being pressed too hard,
please contact our customer service.
