z
Alarm Types shown on Display:
1.
Indication of High-Pressure Alarm
: LCD flashing on specific wheel with High-Pressure Value
shown and “Beep” sound provided.
2.
Indication of Low-Pressure Alarm
: LCD flashing on specific wheel with Low-Pressure Value
shown and “Beep” sound provided.
3.
Indication of High Temperature Alarm:
LCD flashing showing temperature value and “Beep”
sound provided
4.
Indication of Sensor Low-Battery Warning
: Shown on LCD display
5.
Indication of Display Low-Battery Warning
: LCD flashing indication on the Power light &
“Beep” sound.
6.
Indication of Sensor Malfunction Alarm
: Shown on LCD display (Display self-examine).
z
Specification:
*Specification is subject to change for product performance without any notice
B. Installation
:
(Always have the display power on before installation of sensors)
Label on Sensor
1.
Labeled with
F.
: Front Wheel.
2.
Labeled with
R.
: Rear Wheel.
Installation of Sensor:
SUGGESTION
: Make sure the display power is on so the
communication of sensor & display is normal prior to the installation of sensor
。
1. Make sure the top and bottom are tighten on the sensors
(Applied with enclosed wrench)
2. Remove original valve cap from stem
3.
Screw-on the enclosed Hex nut on the valve; then, mount the valve
sensor onto the valve stem. Make sure the Hex nut is being tighten in reverse
clockwise direction to affix with the bottom part of the Valve Sensors
。
NOTICE
: To
Check the valve if it is leaking after installation
, it can be confirmed from the display to see if the
pressure has dropped down.
Sensors
LCD
Display
Dimension
ψ
26.0* H: 2
5.0
(mm)
76mm (L) x 42.5mm (W) x 19.5mm (H)
Weight
14.0
g ± 0.5g ( w/Battery contained)
36.5g
± 0.5g (Battery Excluded)
Power Supply
CR2032 3V Lithium
(1~2 year Lifetime or above 2 years when
under normal condition)
2 x 3A’ Battery Alkaline type or
(Power Supplied line 12V)
Frequency
433.92MHz 433.92MHz
Operating
Temperature
-30
℃
~ + 85
℃
-20
℃
~+80
℃