34
Use a dry cloth or cotton swab to clean the clearomizer.
Note for Cleaning
While holding the fire button of your e-cigarette, inhale the vapor
slowly and continuously through the mouthpiece of your Nautilus
2 clearomizer.
Vaping
There is a airflow control ring located on the head base of the device.
It can be adjusted by turning and is adaptable to your vapor preferen-
ces. The more air flows through the device, the lower is the drawing
resistance. Pay particular attention to a sufficient air supply during
sub-ohm vaping.
Adjusting the Air Supply
The mouthpiece is inserted into the top of the clearomizer. Accordingly,
it can be removed by gently pulling up and once again attached by ap-
plying gentle pressure on clearomizer. The mouthpiece may be cleaned
with warm water. Make sure that it is completely dry before reinserting
into the clearomizer.
Changing the Mouthpiece
Using the Device
