12
13
Using the Wheelchair Brakes
Aspire Evoke 2 Manual Wheelchairs have locking brakes to ensure no movement occurs when the
wheelchair is in a stationary position
WARNING!
Brakes should always be locked when leaving a user unattended in the wheelchair.
WARNING!
Ensure quick release axles are mounted correctly and locked in place prior to seating
a user.
Quick Release Wheels
If the rear wheels need to be removed for repair or replacement, quick release axles are fitted to assist.
1. To engage brakes, push
forward on the brake
lever until firmly locked
in place.
2. To disengage brakes,
pull back on the brake
lever until unlocked
1. To detach the rear wheel from the frame, press & hold the
release button and remove the wheel from the frame
2. To attach wheel, reverse step 1
1
1
2
2
Aspire Evoke 2 & Evoke 2 JNR Manual Wheelchairs have multiple adjustment points to ensure maximum
comfort for users. It is very important that the below steps are followed when adjusting the wheelchair to
ensure maximum safety.
Adjusting Backrest Height
Adjusting Backrest Tension
Adjusting Seat Depth and Rear Wheel Position
9. ADJUSTMENTS
1
1
1
2
2
2
1. Peel back upholstery in the
lower edge of the backrest
cane to reveal two bolt
heads
2. Remove 8 bolts (4 x each
side) and reposition canes
as required
3. Tighten bolts and reattach
upholstery
1. Peel back upholstery to
reveal velcro adjustment
straps
2. Reposition straps to desired
position and reapply
upholstery securing in
place with velcro
1. Remove all bolts as shown
and move backrest receiver
bracket to the desired seat
depth.
2. To adjust rear wheel position
and height, the axle mount
and receiver can be adjusted
as shown.
Once at the desired position,
ensure all hardware is
tightened securely.
NOTE:
Ensure the rear wheels are located in symmetrical positions on both sides of the chair to
maintain stability.
