www.
eCigWorld
.com.au
For more guides, hints and tips; visit www.
eCigWorld
.com.au
When you receive the battery, it will be locked (see unlocking instructions below). Once unlocked, simply
hold down the button as you take a draw. This activates the device and creates the vapor. Release the
button just prior to the end of your draw.
Battery locking
(ON / OFF)
feature
The batteries have a button operated lock; which prevents unintended activation of the battery. Batteries
are shipped locked. To turn the battery on, click the button rapidly 5 times. The LED will then flash 3 times
indicating it is now in standby mode; ready to use. To switch off, click the button 5 times. The LED will flash 3
times and then the battery will be locked.
Variable voltage feature
using 4-CLICK Button
Some eliquids vape better at a lower voltage and some higher - and "better" can be somewhat subjective; so
having this feature allows
you to choose what’s right for you
.
To change voltages is very simple - 3 rapid button clicks takes you to the next setting. The current setting is
indicated when you press the button by the colour of the LED light. Green signifies the low voltage (~3V),
blue medium (~3.6V) and red, high (~4.2V). We recommend trying your juices at the low setting (green) first
as this is also the most energy efficient and will provide the longest battery life between recharges. The
"normal" setting is 3.6V (blue).
Variable voltage using Twist No
b
at the bottom - VV Twist / Vision Spinner / Aspire CF Batteries
IMPORTANT: Only use the
eCigWorld
supplied 420mA charging lead and USB plug. Using other chargers
may damage the device and create a fire risk.
Please fully charge the battery before use.
Ensure the battery’s connector is dry and clean before
connecting to the charger. The battery is connected
to the charger by screwing it into the device. Take care not to cross the thread or over-tighten.
NOTE: Over-tightening chargers, clearomizers and atomizers can damage a battery. Carefully screw on
these components until you begin to feel resistance; then apply a maximum further one-quarter turn.
The battery will take 3.5 - 4.5 hours to recharge from flat using the USB wall plug. We strongly recommend
the use of the USB wall plug.
The battery includes IC (integrated circuit) protection on the PCB (Printed Circuit Board), which prevents
over discharge, over charge and over current. The battery charger lead will automatically switch to standby
(green) once the appropriate voltage has been reached.
Please note that the USB wall plug LED will remain the same colour, regardless of charging stage. The wall
plug also contains safety features in its circuitry.
Variable voltage Twise batteries have a nob
d
ialer at the bottom of the battery which can be turned/
twisted to set it at desired voltage setting These batteries are lot easier to change the voltage setting.
Vision Spinner, Spinner 2, Aspire CF VV, Aspire CF VV+ have twist dialer.
