background image

The temperature of the appliance can be adjusted by turning the 
thermostatic dial. Setting of the thermostat dial at normal is the most suitable 
for general operation. Max is the coldest setting.

Do not overload the appliance. Where possible 
open the door less often in order to maintain the 
temperature of the appliance and save electricity.

       3.

Operation

Operation

       2.

When operating the appliance for the first time, set the thermostat dial at normal, 

connect to the electricity and turn it on without loading any food. 

 Then set the thermostat  

dial to the desired setting and place foods into the appliance. 

Wait for the 

appliance to become cold, usually this takes 2 or 3 hours.

       1.

Cautions

Cautions

When defrosting, never use any sharp or metallic objects to remove the frost /

 ice on the surface of the evaporator as this will damage the evaporator. 

Do not store bottled beverages in the freezer as liquids may expand during 

freezing causing the bottle to break and damage the appliance.

If the power supply is turned off for any reason, wait ten minutes before 

switching the appliance on again.

 Defrost the freezer compartment whenever the layer of frost on the surface 
 reaches 3 or 4 mm. When defrosting, remove all foods, unplug the appliance 
 and open the door. After the frost has melted, discard the water and dry the 
 interior of the appliance. The appliance can then be restarted.

       4.

Summary of Contents for TWLFZ-170














Reviews: