6
E N G L I S H
ASPIRCOMFORT PRO dH
AIR HANDLING SECTION
The unit can be equipped with a cooling circuit for dehumidification or integration of cooling and heating. In the
various configurations, it will be possible to select the type of desired air handling from dehumidification only or
dehumidification with heating and cooling of the primary air.
FILTRATION
PM1 80% filters, easily removable on the outdoor air intake on the exhaust air.
Easily removable coarse filters with low head loss on the recirculation air.
STRUCTURE
Double sandwich panelling, unit with external coating and internal galvanised finish.
Galvanised sheet metal self-supporting perimeter structure. Panel insulation is built with high performance 20
mm-thick insulation and adhesive polyethylene 6 mm-thick insulation.
COOLING CIRCUIT
Built with braze welded copper, complete with: High efficiency compressor, Filter dryer, finned coils, water
exchanger, solenoid valves, lamination device, liquid receiver, high and low pressure switches and pipe thermal
insulation.
ADJUSTMENT
Electric panel on-board the unit with microprocessor and dedicated regulation. Fan control, display of the
temperature probes inside the machine, timed dirty filter control, recirculation and renewal air control. Possibility
of unit control with MODBUS RTU RS 485 communication
