•
Operation Guide
Before beginning please check the following:
1.
You have read and understand all warnings on page 2.
2.
You are using new and full propane cylinder (use of a used cylinder can lead to reduced performance or
equipment failure).
3.
You have inspected your regulator, hose, and torch assembly and verified there are no leaks or physical damage.
4.
You are outdoors in a well-ventilated area that is free and clear of any flammable matter.
5.
You have completed the assembly of the equipment correctly.
6.
You have ‘Direct Fire’ type
crack sealant such as GemSeal, SealMaster, Durafill, Craftco or Maxwell.
7.
There is absolutely NO water in or around the kettle.
8.
You are wearing a protective face shield.
9.
You are wearing heat and fire-resistant protective gloves.
10.
You are wearing heat and fire-resistant protective clothing which covers all exposed skin.
Part 1
–
How to Load and Light your Melter
⚠
Inspect and ensure there are no leaks between any of the connections before proceeding.
1.
Load crack sealant into kettle, while ensuring sealant is resting on the bottom of the kettle.
2.
How to Light your Torch
1.
Fully CLOSE the regulator valve by turning the
knob on the regulator COUNTERCLOCKWISE
Fully OPEN the propane cylinder by
turning the valve COUNTERCLOCKWISE.
