front discharge position is used to
8) Operating Instructions
remove debris from along walls, fences,
Refer to Engine Manual for Engine
etc., the side discharge position is used
Operation.
to form windrows or piles. The
horizontal deflector directs air downward
Follow directions in the engine manual
to “chisel” under wet, heavy leaves and
for operating oil type and quantity.
litter. The velocity is regulated by the
throttle control. Slight changes in
Leaves, thatch or other debris can be
deflector will have a big effect on air
directed into windrows or piles, by
flow. Experiment until you find the best
simply maneuvering the unit and
position for your needs. For best
directing the flow of air accordingly.
performance, be sure engine recoil
starter assembly, the blower intake and
Air flow can be directed to the side or
outlet areas are clear and free of leaves
front by the two-position deflector. The
or other debris.
fuel recommendations and additional
9) Maintenance Instructions
information.)
1. keep all nuts, bolts and screws tight.
5. Tires - Tubeless. Inflate to air
2. Never store the Blower with fuel in its
pressure of 30 P.S.I.
fuel tank inside a building or in a
6. Labels should be inspected before
confined space where fumes may reach
each use. Replace damaged labels
an open flame or sparks.
immediately.
3. Always refer to the instruction
7. To prevent accidental starting,
manual for important details if the
remove spark plug wire when servicing
product is to be stored for an extended
engine or equipment.
period.
8. Check oil level regularly.
4. Engine - 4 cycle. (Refer to engine
manufacturer’s operating instructions for
Warning:
The engine exhaust from this product contains
chemicals known to the State of California to cause
cancer, birth defects or other reproductive harm.
1-866-399-5562
www.asphaltkingdom.com
Specifications, illustrations and descriptions are as accurate as
known at the time of publication and are subject to change
Page 6
TM
Summary of Contents for LANDSHARK LSC Series
Page 8: ...Page 7 ...
