Page 2/2
ITEM NO:IML-303-GRY Executive Desk
aspenhome
R
ASSEMBLY INSTRUCTIONS
MADE IN VIETNAM
ah
STEP 1:Remove the drawers from the pedestals: Fully extend the drawer, then press the plastic tab down on the right and
up on the left at the same time as shown below. While holding the tabs pressed down/up, pull the drawer out.
Plastic Tab
STEP 4: Replace all of the drawers in pedestals:
Fully extend the slides from the case. Then align the
slides on the drawer to the slides on the case as
shown. Push the drawer back in. You may have to
slide the drawer in and out several times in order to
properly align the ball bearings.
STEP 2:Remove bolts, lock washers and flat
washers from modesty panel (3 pcs), left
pedestal (4 pcs) and right pedestal (4 pcs) to the
desk top; Then remove bolts, lock washers, flat
washers from pedestals (4pcs) to center drawer
frame. Take the desk top off.
STEP 3:Remove bolts, lock washers and flat
washers from modesty panel to left pedestal
(3 pcs) and right pedestal (3 pcs).
To dis-assemble desk (If necessary):
To assemble desk
Notes: To reassemble the desk, perform STEP 3 then STEP 2 above before proceeding to STEP 4
below.
A
A
Left Pedestal
Right Pedestal
Modesty Panel
Desk Top
Modesty Panel
Left Pedestal
Right Pedestal
10-31-2018
