07-20-2017
Page 3/3
ITEM NO: I91-344 Peninsula Desk
aspenhome
R
ASSEMBLY INSTRUCTIONS
MADE IN VIETNAM
ah
STEP 3: Attach drawer frame, pedestal and end connector to
back panel by using bolts (16 pcs), lock washers and flat washers.
STEP 5: Replace all of the drawers in pedestal: Fully extend
the slides from the case. Then align the slides on the drawer to
the slides on the case as shown. Push the drawer back in. You
may have to slide the drawer in and out several times in order
to properly align the ball bearings.
Bookcase
Desk top
A
C
D
E
STEP 4: Remove the drawer from the bookcase,
Attach the assembly desk to the bookcase by using
3 bolts(A) 2 bolts(B), lock washers(C), flat
washers(D).
Note:Requires one person holding the top panel
while another person secures bolts to desk top.
B
C D
E
