Page 2/4
aspenhome
R
ASSEMBLY INSTRUCTIONS
MADE IN VIETNAM
ah
ITEM NO: I260-9133 Display Case
STEP 3: Insert the end on left/right tube side to back top tube, attach the left/right tube side to
the middle assembly by using 6 bolts (B), lock washers(C) flat washers(D). Do not completely
tighten bolts to allow some leeway for adjustment in STEP 4.
B C D
E
STEP 2: Pull out the top panel from the crown.
Left Tube Side
Right Tube Side
Middle Assembly
STEP 4-1: Align the lower metal panel on the left/right tube side with the groove in the bottom
base by using 6 bolts(A), lock washers(C) and flat washers(D).
Crown
Top Panel
STEP 4-2: Align the bolts through holes in the crown by using 4 hex nuts (F), lock washers(H)
and flat washers(I). Completely tighten all bolts and nuts used in Steps 3 & 4.
Bottom Base
Crown
F
H
I
CD
A
Lower metal plate
on the tube side
Tube Side
Back Top Tube
Back Top Tube
G
Bottom Base
Crown
01-15-2020
