aspenhome
R
ASSEMBLY INSTRUCTIONS
MADE IN VIETNAM
ah
Page 2/2
Buckle plate
A
B
C
Metal Leg
Metal Leg
D
Screw
Case
Screw
ITEM NO: I256-9140 End Table
STEP 3: Reverse each knob by removing the screws while each drawer is open and attach
all knobs to the front of the drawers with screws as shown below.
Knob
Screw
Knob
04-28-2022
1/
8"
STEP 1: Put the case upside down on a soft surface.
STEP 2: Each metal leg will come with screw pre-installed with a 1/8" lag as shown below.
Adjust as needed to ensure the 1/8"
lag. Insert the screw on each metal leg into the buckle
plate on the case and push it down to the suitable position. Attach the metal legs by using 4
bolts (A), lock washers (B) and flat washers (C). Use the allen wrench (D) to tighten the all
bolts. If the leg is loose in the buckle plate, the leg should be removed and the screw adjusted
as needed. Once legs are all secure, return the case to the upright position.
