aspenhome
R
ASSEMBLY INSTRUCTIONS
MADE IN VIETNAM
ah
Page 2/2
ITEM NO: I256-451 1 Drawer NS
STEP 3: Taking out the knob by removing the screw when opening the drawer, attach the knob to
the front of the drawer by screw as shown below.
Knob
Screw
Knob
1/4"
Buckle plate
A
B
C
Metal Leg
Metal Leg
D
Screw
Case
Screw
STEP 1: Put the case upside down on a soft surface.
STEP 2: Each metal leg will come with screw pre-installed with a 1/4" lag as shown below. Adjust
as needed to ensure the 1/4"
lag. Insert the screw on each metal leg into the buckle plate on the
case and push it down to the suitable position. Attach the metal legs by using 4 bolts (A), lock
washers (B) and flat washers (C). Use the allen wrench (D) to tighten the four bolts. If the leg is
loose in the buckle plate, the leg should be removed and the screw adjusted as needed. Once legs
are all secure, return the case to the upright position.
09-28-2021
