aspenhome
R
ASSEMBLY INSTRUCTIONS
MADE IN VIETNAM
ah
Page 3/4
STEP 4: Screw the bolts(H) into HB & FB. Make sure the slat bearer is in the lower position.
Align the bolts with the holes in the end of side rails and attach the side rails to HB & FB using
Flat Washer (J), lock washers(I) and nuts (K).Then use a hex wrench to tighten all the nuts.
Side Rail
Headboard
Slat bearer
Side Rail
H
Make sure the slat bearer is
in the lower position.
I
L
J
STEP 5: Attach the support legs with levelers to the slats.
Adjust the levelers on bottom of support legs when necessary.
Leveler
This End Up
Slat
Wood Screws (M)
STEP 6: Arrange the slats on the slat bearers equally and attach
to the slat bearers with wood screws (M).
ITEM NO: I249-412-TAL Queen Panel HB
I249-402-TAL Queen Rails
I249-413-TAL Queen Panel FB
Support Leg
(for slat)
K
07-23-2020
