CHAPTER 3
ASPEN ADS
-B OUT
ADS-B Pilot’s Guide
Page 3-2
091-00057-001 REV A
ADS-B Pilot’s Guide
Page 3-3
091-00057-001 REV A
Whenever UAT CTL: MENU is displayed on the Aspen PFD, pressing the MENU button
immediately presents the Aspen PFD’s UAT menu page. When UAT CTL: MENU is not
displayed, push the MENU button and rotate the right know to the PFD’s UAT menu
page.
The UAT menu page displays: (
Figure 3-1
)
UAT Status – Good
(displayed in Green)
3
Push to Ident –
Displayed in white,
and is selectable
5
Hold for FIS-B
weather legend
UAT Code – Displayed
in white, and is
editable
4
Horizontal Vector
Scale is displayed
in white and is
selectable
Horizontal Vector Scale
The Horizontal Vector component of traffic is adjustable from 0 to 60 seconds. When
the HORZ VECT SCALE Hot key is pushed and the right knob is rotated the vector scale
indexes 10 seconds.
3.2.1 PFD Controller Mode
On the rare occasion when your transponder fails the ADS-B transceiver no longer
interrogates the UAT code from the transponder and the PFD becomes the UAT Code
and IDENT controller.
The UAT code on the UAT Menu page now will be displayed in “WHITE”, the UAT Code
legend displays “UAT : MENU” and your PFD is now used to manually control the UAT
code and IDENT function.
NOTE
On the reversionary PFD view of the MFD the control
functions (UAT Code and IDENT) are always disabled.
NOTE
The reversionary PFD UAT menu page only allows
editing of the Horizontal Vector Scale.