Aspen Aire KJ380G-CW28, User Manual

Page: 10 / 60

07
3
sec
Operating Instructions
4.2 Filter Replacement Indicators
The corresponding lighted number indicates the type of
filter that requires cleaning or replacing. At the same time,
the lifespan of the other filters can be checked as well.
Friendly Reminder:
Number 1 lights up to remind you to check if the pre-filter requires cleaning
and also to check if the SHE Oil Filter is dirty or requires replacing.
When number 2 lights up, it is a reminder for you to check if the Biowave
Filter & Nano Fresh Filter is dirty or needs to be replaced.
Check if the BIO-HEPA Filter is dirty when number 3 lights up. Refer to its
panel indicating filter life as a reference to decide if the filter needs changing.
4.2.1 Filter Cleaning or Replacement Time Table
1 ~ 3 months Pre-filter
SHE Oil Filter
Biowave filter
Nano Fresh Filter
&
BIO-HEPA Filter
Filter Type
Duration to Clean/
Replace Reminders
Action
1 ~ 6 months
6 ~ 12 months
3 ~ 12 months
Clean
Check / Replace
Check / Replace
Check / Replace
Note: The above time table is only a recommendation. Please clean or
replace filters according to the environment the product is used in and its
wear and tear conditions. Reset the filter life timer after replacing with a
new filter. The filter light indicator should be off after resetting.
When the product is dissembled and filter light
indicator starts blinking, touch the button and
the options of filter to replace will be displayed.
Choose the filter that has been changed. The light
will stop blinking and change to a steady light.
Press the button for 3 seconds and the filter
light indicator will be off. Resetting is completed.
4.2.2 Resetting the Filter Life Timer