SDM-6TE
User Manual
1. Safety rules
•
Before first use, refer to this manual
•
Before first use, make sure that all cables are connected properly
•
Please ensure proper working conditions, according to the device specifications
(eg: supply voltage, temperature, maximum power consumption)
•
Before making any modifications to wiring connections, turn off the power supply
2. Module Features
2.1. Purpose and description of the module
The SDM-6TE module allows you to measure the temperature with attached popular
sensor Pt100, Pt500, Pt1000, Ni100, KTY81-110, NTC (Carel) and thermocouple (type
J, K, T, N, S, R, B). In addition, it is possible to measure voltages in the range 256mV
(10μV resolution) and to 2048mV (100μV resolution) as well as the measurement of
resistance to 8k
Ω
.
The device has a set of six inputs for the temperature measurement. It is possible to 2-
or 3-wire measurement of sensors Pt100, Ni100, Pt500, Pt1000 and 2-wire
measurement thermocouples and other sensors. In addition, the module is equipped with
2 configurable digital outputs (alarms).
Values are read via RS485 (Modbus), so we can easily integrate the module with
popular PLCs, HMI or PC equipped with the appropriate adapter.
This module is connected to the RS485 bus with twisted-pair wire. Communication is
via MODBUS RTU or MODBUS ASCII. The use of 32-bit ARM core processor
provides fast processing and quick communication. The baud rate is configurable from
2400 to 115200.
The module is designed for mounting on a DIN rail in accordance with DIN EN 5002.
The module is equipped with a set of LEDs used to indicate the status of inputs and
outputs useful for diagnostic purposes and helping to find errors.
Module configuration is done via USB by using a dedicated computer program. You
can also change the parameters using the MODBUS protocol.
Expansion modul – 6 temperature inputs
User Manual
Version 1.1
3 z 17
