Parts Check List
Secure unit & fix handles.
1x Armoire Base (assembled)
1x Armoire Top (assembled)
You will also need a Screwdriver
for hinge adjustment (not supplied)
You need:
screw driver
A
. Open the drawer and doors, then with a screw driver
remove the knobs from the inside face of each door and
drawer and attach it to the outside as shown.
You need: 4 x wood screws
With a minimum of two people
carefully lift the assembled
top onto the assembled base, ensuring that all is aligned.
The top section simply sits into the base.
A.
Fix the upper unit to the lower base using the 4 x wood
screws supplied using the 4 through holes provided in the
lower shelf of the unit.
1x Securing block & Fittings
4 x wood screws for fixing the
the upper unit to the lower base
Door Hinge Adjustment.
Adjusting the Door (Horizontal movement).
The doors can also be adjusted horizontally by tightening or loosening the single screw
in the centre of each individual hinge as shown below. Turn the pre-fitted screws
anticlockwise to pull the doors outwards (away from each other) and clockwise to pull the
doors inwards (towards each othe
r).
Adjusting the Door (Vertical movement).
The doors can also be adjusted vertically by loosening the two screws that attach the
mounting plates to the side panels as shown below. Once the mounting plate screws
have been loosened the doors can be lifted or lowered to adjust the final position. Once
you have positioned the doors as required, re-tighten the mounting plate screws to
secure the doors in place.
Adjusting the Door (Inward & Outward movement).
Once fitted, the doors can be adjusted so that they can move inwards or outwards by
loosening the single screw that is used to connect the hinge to the mounting plate. Once the
screws have been loosened the doors can be pulled outwards or pushed inwards adjusting
the final position of the doors. Once you have moved the doors into its required position, re-
tighten each screw per hinge to secure the doors in place.
Hinge adjustment and securing unit to wall.
You need:
securing block, screw driver and
fittings.
Secure the block to the back edge of the top as
shown. Move the Amoire into its final position
close to the wall and fasten the metal plate to a
sound wall using a suitable wall fixing and
screw (not supplied) appropriate to that wall.
This work should be carried out by a competent
person or a professional.
remove timber protectors
