ASP motioncare LIANA, User Manual

Page: 32 / 50

Gebrauchsanweisung LIANA
| Version 1.0
Seite 32 von 50
13. CLEANING AND DISINFECTION
ATTENTION
Cleaning and disinfection are only permitted if the patient is not present!
Make sure that the system is not in operation during cleaning.
After each use, the product must be completely disinfected using disinfectant. This prevents cross-
contamination.
Only use the disinfectant after the patient has vacated the product.
Follow the manufacturer's instructions for the disinfectant to be used.
Avoid direct contact with the concentrated product. If necessary, protect the skin and eyes using gloves and
protective goggles.
ATTENTION
There is a risk of electric shock if the power supply is not disconnected while cleaning the device.
Please disconnect the power supply by pressing the safety switch and/or opening the door of the controller
box.
13.1. Cleaning instructions
Clean the device and upholstery with a soft, lint-free cloth moistened with soapy water or a commercially available
plastic cleaner. To remove grease stains, skin residues and hair, use a sponge and soap.
NOTE
Ensure that you disconnect the equipment from the power supply/battery before starting cleaning and
disinfection.
Do not use alcohol-based agents to clean the upholstery or the stabilisation straps.
Do not use abrasive substances or substances containing free chlorine or oxygen, scouring agents or other
aggressive cleaning and disinfecting agents!
Never use abrasives to clean the LIANA patient sitting/standing stabilisation aid!
To avoid damage, do not use aerosol cleaners, sprays, abrasives or solvents to clean the control unit. If aggressive
cleaning agents are used anyway, all warranty claims regarding surface damage will be void.
Make sure that no liquids get into the housing, motor, control unit or battery of the device when cleaning and
disinfecting!