LongReach scanner
17
Trigger Mode Setup
To set the trigger mode, scan all the barcodes in one or the other of the
columns below.
Scan all the barcodes in the left column,
Use Trigger
, to operate the scanner
in the normal mode, where you need to press the trigger to scan a barcode.
Scan all the barcodes in the right column,
Continuously On
, to operate the
scanner with the beam always on –that is, you don't need to press the trigger
to scan a barcode.
Note that “
Use Trigger
” mode should be used for portable applications.
Use Trigger
1
PROGRAM
2
TRIGGER
MODE
3
USE
TRIGGER
4
END
Continuously On
1
PROGRAM
2
TRIGGER
MODE
3
CONTINUOUSLY
ON
4
DOUBLE SCAN VERIFICATION
5
SHORT
TIMEOUT
6
END
