31
Analog Video Output Setting
This section determines the format and video size of the decoded analog video.
Output TV System:
Select “NTSC-60Hz” or “PAL-50Hz” to match your local video
system.
Output Video Size:
Full Size: Enlarge and display the decoded analog video to fill up the monitor.
Original Size: Display the original size of the decoded analog video.
Video Receiver Setting
After enable “Video Receiver” function, this video transceiver will decode the video of
the remote IP camera or video server, and output the decode video through the “Video
Out” connector.
Note:
The video transceiver can decode up to Full-D1 video resolution (NTSC: 720x480,
PAL: 720x576), if the remote IP camera is Mega-Pixel or 2 Mega-Pixel, please
configure its resolution to 640x480 or less.
Channel:
There are 10 channels of IP camera or video server can be setup for
decode, and the settings can be stored into this device. With the channel list, you can:
Select the channel number to assign the remote IP camera or video server.
If the channel has been assigned for remote IP camera or video server,
select the channel to change the decoding camera or video server.
Receive from IP Address:
Input the IP address of the remote IP camera or video
