45
7. Factory Default
To recover the default password and other settings, please follow the steps:
1. Power off the video server.
2. Use a wire to close the pin 2 and 3 of RS-232 connector on the back panel.
3. Power on the video server, and wait for around 30 seconds to boot the video
server.
4. Remove the connected wire of pin 2 and 3 of RS-232 connector.
5. All the setting will be restored to factory default.
6. Re-login the video server using the default username (admin) and password
(admin).
7. The IP address is probably restored to the default, in this case, use IP Search to
search the video server. The default IP address is 192.168.1.210
Close these two pins