7
Rear Panel
Power Connector &
Switch:
To connect the included AC power cord. Press the switch to “I”
position to power on the NVR.
Network Connector: RJ-45 connector, Gigabit Ethernet port.
VGA Output:
Connect to LCD monitor for locally display (D-Sub connector).
HDMI Output:
Connect to LCD monitor for locally display (HDMI connector).
HDMI/VGA Switch:
The switch to determine which display port (HDMI or VGA) to
output the image.
Audio Out:
The 3.5mm phone jack allows connect to earphone or an
amplified speaker, you can hear the voice of the NVR.
Terminal Block:
The terminal block provides the following functionalities:
16 Sets of Digital Input
2 Sets of Relay Output
RS-485
RS-232
I/O Connections
I/O terminal connector:
16 sets of Digital Input (Alarm In + GND) – The digital inputs for connecting
devices that can toggle between an open and closed circuit, such as PIRs,
door/window contacts, glass break detectors, etc. When a signal is received the
