61
7. Factory Default
To recover the default settings of this device, please follow the steps:
1. Power off this device.
2. Use a wire to close the “DEFAULT” and “GND” of the Terminal Block.
3. Power on the device, and wait for the Power LED start flashing.
4. Remove the connected wire of the “DEFAULT” and “GND”.
5. Re-login the device using the default username (admin) and password (admin).
6. The IP address is probably restored to the default, in this case, use IP Search utility
to search the device. The default IP address is 192.168.1.200
Close “DEFAULT” and “GND”
