6
3. Product Installation
3.1 Hardware Installation
3.1.1 Cable Connections
Power Jack:
To connect the DC 12V power adapter.
Network Connector:
The RJ-45 connector allows connect the Ethernet cable.
Microphone:
The built-in microphone to receive the voice.
Speaker:
The built-in speaker to play the voice from the remote PC.
Micro-SD Card Slot:
Allows insert a Micro-SD card to be the storage.
USB Port (Available for
wireless model):
If the camera is wireless model, connect the included USB
wireless dongle into this port.
Or, connect to a USB flash to be the storage.
Power LED:
Indicates whether the power is ON/OFF.
Network LED:
Indicates the status of network access.
Focus Ring:
This ring allows adjust the focus.
1. Connect Ethernet cable for network connection.
2. Connect power adapter to turn on the camera.
3. If the camera is PoE model, the power adapter is not necessary. The camera will get
the power from the PoE injector or PoE switch.
