20
Pattern 1~4: To make camera patrol the selected
pattern. Pattern is a function allows you create
specific path with individually-defined stops. You can
Selected Group: To make camera move around all the
selected groups. You can select the groups in different
Selected Point: To make camera move around all the
selected presets (among 1 to 32). You can select the
presets in
Start “Patrol”:
Click
button.
Stop “Patrol”:
Click
button.
Auto Pan :
Click
button to open the Auto-Pan control panel.
This camera provides 3 modes for auto pan function.
Pan/Tilt
(L<->R)
Continuous panning
between two
positions A and
positions B:
The position A can be set by clicking
button
(Left-Limit); the position B can be set by clicking
button (Right-Limit).
Start “Auto Pan”:
Click
button.
Stop “Auto Pan”:
Click
button.
Other
Mode
Choose the Auto
Pan mode from the
pull-down list. There
are 2 modes are
available:
Auto Pan-Only: This is for continuous panning between
two positions A / B. Camera will not move in vertical
direction, however. To start this mode, please enter
complete the settings of start position, end position,
moving speed and dwell first.
Auto Pan-Circle: To perform continuous panning in 360
o
.
