23
Mode:
Select the mode to enable or disable the streaming 2.
Basic / Advanced Mode: Enable and configure the streaming 2. Advanced
mode provides more detail parameters for setting.
3GPP Mode: Enable the streaming 2 as 3GPP mode, it allows a 3G mobile
phone to view the live video.
Close: Disable the streaming 2.
Resolution:
Select the resolution from the pull-down list.
VGA – 640X480
QVGA – 320X240
QQVGA – 160X120
Video Frame Rate:
The video refreshing rate per second.
The total frame rate of
streaming 1 and 2 is up to 30FPS (NTSC) / 25FPS (PAL). Before set the frame rate of
streaming 2, you have to decrease the frame rate of streaming 1, and then set the
frame rate of streaming 2.
Video Format:
Choose MPEG4 or JPEG format to output the video stream.
MPEG4:
The video stream will be compressed in MPEG4 format. Choose CBR
(Constant Bit Rate) or VBR (Variable Bit Rate) in Video Control Mode.
CBR: Set the Video Bitrate from 32Kbps ~ 2Mbps depend on the upload
bandwidth of network.
The data size of video stream will be limited under
the selected bit rate.
VBR: Set the Video Quantitative from 1 ~ 10, the higher value will get
better video quality.
The data size of video stream is no limitation, if the
upload bandwidth of network is lower than the data size, the video will be
displayed slowly.
JPEG:
The video stream will be compressed in MJPEG format.
Quality: 5 levels for select. The higher quality will get bigger file size.
RTSP Path:
Assign a name to identify this video stream. When view the video stream
with RTSP connection, the URL should be “rtsp://<Public IP of this device>:<RTSP
port>/<RTSP path>”.
