7
2. The IP Search window is displayed below.
3. IP Search searches all the network devices which connect to the intranet and lists
on the window. Click [Search] button to search again.
4. From the list, select the device with the MAC Address that corresponds to the
device that is to be configured.
5. Click one of the network devices, the network configuration of this device will show
on the bottom.
6. After filling in the IP Address, Subnet Mask, Gateway and the others, click [Set]
button to complete the configuration settings and save into the remote device.
7. Click [Search] button to re-search the network devices. Click the network device
listed on the window and click [Open Web] button. It will open an IE browser and
connect to this device directly.
