10
◆
Controller Over-Current Cut Settings (optional)
CUR
represents controller over-current cut settings. The current value ranges from 7.0A to 22.0A. The default
value is 15A.
To change a current value, Press the
+/-
button to increase or decrease to choose the desired value.
To store a changed setting, hold
i
button for 2s to confirm and return to previous menu.
Current settings interface
◆
Power assist sensor settings
（
optional
）
PAS
represents power assist sensor settings.
PAS direction settings
“
run-F
” means “go forward” while “
run-b
” means “go backward”. The default value is “run-F”.
Press the
+/-
button to select F or b to change the direction of Power Assist Sensor.
To store a changed setting, press
i
button to confirm and access PAS sensitivity settings
PAS direction settings
PAS Sensitivity Settings
SCN
represents PAS sensitivity settings. The sensitivity value ranges from “2” to “9”. “2” is the strongest, “9” is
the weakest. The default value is “2”.
To change the PAS sensitivity, press the
+/-
button to choose the desired sensitivity value.
To store a changed setting, press
i
button to confirm and access magnet disk settings.
