4
309424
Shipping Damage
Check the Zip Clean for shipping damage.
Notify the carrier immediately
if there is any damage.
Setup
Connect High–Pressure Hose and Gun
Connect the high–pressure hose between the pump outlet and gun
inlet. Both of these connections are made with quick couplers.
Install Spray Tip
Install the spray tip on the wand. Installing and Changing Spray Tips, page 10).
Up to 100 ft (30 m) of 3/8” high–pressure hose
may be used. Longer hoses could affect Zip
Clean and chemical injector performance
balance.
CAUTION
Connect to Water Supply
Connect hose with at least a 3/4–in (19 mm) ID from the water
supply to the 3/4–in garden hose inlet on the Zip Clean. The
supply hose should not be more than 50 ft (15 m) long.
CAUTION
Before you connect garden hose to Zip Clean. Check
your local plumbing code regarding
cross–connection to water supply. If required, install a
backflow preventer.
If inlet water pressure is over 60 psi (4.1 bar), a regu-
lating water valve must be installed at the garden
hose connection.
Do not exceed 160
_
F (70
_
C) inlet water temperature.
NOTE:
The water source must have a minimum flow rate equal to that of Zip Clean.
Summary of Contents for Zip-Clean 2730B
Page 13: ...13 309424 Notes ...
