33
A
A
s
s
l
l
a
a
n
n
M
M
a
a
c
c
h
h
i
i
n
n
e
e
,
,
I
I
n
n
c
c
.
.
i
i
n
n
f
f
o
o
@
@
a
a
s
s
l
l
a
a
n
n
m
m
a
a
c
c
h
h
i
i
n
n
e
e
.
.
c
c
o
o
m
m
,
,
T
T
e
e
l
l
:
:
+
+
1
1
3
3
0
0
1
1
5
5
2
2
8
8
1
1
6
6
9
9
6
6
8. SAFE INSTALLATION OF THE SAW BLADE
8.1 Follow the instructions below to remove the circular saw blade from the blade shaft.
8.1.1. Switch the MAIN POWER SWITCH on the machine to “0” to cut the power coming to
the machine. Open the front cover of the main frame with its key.
8.1.2. Remove the four bolts on the saw blade guard with an appropriate wrench by
turning counter-clockwise.
8.1.3. Remove the front cover of the saw blade guard by holding its handle.
8.1.4. Remove the M10 screw (In Figure 14) by turning it counter clockwise with an 8 mm
Allen wrench. (Hold the saw blade shaft at the opposite end with a 17 mm wrench key
and prevent the shaft from turning. (Figure – 14)
8.1.5. Remove the 30x8x7 mm washer, outer nut washer and the saw blade bracket 1 in
an order. (See Figure – 15)
8.1.6. Remove the saw blade carefully.
8.1.7. Insert the new saw blade on the saw blade shaft, ensuring correct rotation direction.
(See Figure – 9)
8.1.8. Insert the other parts (washer, outer nut washer and saw blade bracket 1) in reverse
order as removal.
8.1.9. Tighten the M10 screw with an 8 mm Allen wrench by turning in clockwise direction.
(Prevent the saw blade shaft from turning by holding it with a 17 mm wrench key.)
8.1.10. It is necessary to sharpen / replace the saw blade in certain intervals depending on
the material. If the cut material leaves burr after the cutting operation or if the saw blade
is strained, it needs to be sharpened / replaced.
8.1.7 The blade washer is 32 mm. The saw metric blades come with 32 mm bore diameter.
You can use this washer for both diameters by choosing the correct part on it.
When replacing the saw blade, use the part of the saw blade washer by matching the saw
blade bore diameter (Figure – 15).
CAUTION !
